Carver Sound and Audio

Carver Amplifier and Carver Audio Product Specs and Information
June 21, 2009

CM-1090

Amplifier Section
8-ohm FTC rated power/ch 100 W
4-ohm FTC rated power/ch 150 W
2-ohm dynamic power/ch 80 W
Bridged mono power -
4/8-ohm FTC rated THD 0.5 %
Rated full power bandwidth 20-20kHz
S/N-IHF A-Weighted,dB 85
Slew Rate 180
Dimensions (HxWxD inches) 4.5x19x13w
Comments Integrated stereo amplifier
PreAmp Section
Frequency response 20-20kHz +- 1dB
Phono sensitivity for 0.5V@1kHz 2.5
MM Phono Overload mV 150
Phono input capacitance pF -
MM S/N A-weighted 0.5v ref. 80
MC S/N A-weighted 0.5v ref. -
Tone Controls 3-band
Inputs 7 audio
Comments Sonic Holography
 
Remote control sonic holography integrated amplifier with transfer function modified power section. Silver seven transfer function modified. 100 watts/channel RMS into 8 ohms, 20-20 KHZ with no more than 0.1% THD. Analog power meters. Five audio inputs. Motorized volume control. 3 - band tone controls. Dual tape monitors with dubbing. Pre/main outputs. Remote compatible with Carver tuners and CD players.
Carver CM 1090 2 Channel Amplifier TL 3200 CD player TX 12 Tuner
Carver CM 1090 2 Channel Amplifier TL 3200 CD player TX 12 Tuner $101.00 (18 Bids)
Time Remaining: 12h 50m
Replacement Remote for CARVER PSC60 RH75 C5 HR722 HR752 RH5 CT6 CM1090
Replacement Remote for CARVER PSC60 RH75 C5 HR722 HR752 RH5 CT6 CM1090 $39.95
Time Remaining: 2d 5h 4m
Buy It Now for only: $39.95
USED Carver CM 1090 2 Channel Integrated Amplifier Fully Tested new Meter Lamps
USED Carver CM 1090 2 Channel Integrated Amplifier Fully Tested new Meter Lamps $425.00
Time Remaining: 15d 20h 53m
Buy It Now for only: $425.00